E65816117I Maintenance and inspectionWarning ReferencesectionProhibited Do not replace parts.This could be a cause of electric shock, fire and bodily injury. To replace parts, call yourToshiba distributor.14.2Mandatoryaction The equipment must be inspected daily.If the equipment is not inspected and maintained, errors and malfunctions can not bediscovered and that could result in accidents. Before inspection, perform the following steps.(1) Turn off all input power to the inverter.(2) Wait at least 15 minutes and check to make sure that the charge lamp is no longer lit.(3) Use a tester that can measure DC voltages (400V/800V DC or more), and check thatthe voltage to the DC main circuits (across PA/+ - PC/-) is 45V or less.Performing an inspection without carrying out these steps first could lead to electric shock.14.14.14.2 DisposalCaution ReferencesectionMandatoryaction If you dispose of the inverter, have it done by a specialist in industry waste disposal (*).If you dispose of the inverter by yourself, this can result in explosion of capacitor orproduce noxious gases, resulting in injury.(*) Persons who specialize in the processing of waste and known as "industrial wasteproduct collectors and transporters" or "industrial waste disposal persons”. Pleaseobserve any applicable law, regulation, rule or ordinance for industrial waste disposal.16. Attach caution labelsShown here are examples of caution labels to prevent, in advance, accidents in relation to inverters, motors and otherequipment. Be sure to affix the caution label where it is easily visible when selecting the auto-restart function (5.9) orthe retry function (6.19.3).If the inverter has been programmed for restartsequence of momentary power failure, place warninglabels in a place where they can be easily seen andread.(Example of caution label)If the retry function has been selected, place warninglabels in a location where they can be easily seen andread.(Example of caution label)Caution (Functionsprogrammed for restart)Do not go near motors and equipment.Motors and equipment that have stoppedtemporarily after momentary power failure willrestart suddenly after recovery.Caution (Functionsprogrammed for retry)Do not go near motors and equipment.Motors and equipment that have stoppedtemporarily after an alarm will restart suddenlyafter the specified time has elapsed.Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
