14STEP 4 Press the SET button to copy.• Press the SET button and the program schedulemarker ( ) will be displayed.STEP 5 Select other copy destination days if desired.• You can copy the selected source day program intoother days by repeatedly pressing the DAY button toselect a day of the week followed by the SET buttonto set it.NOTE• Pressing the CLEAR button extinguishes theprogram schedule marker ( ) and cancels thecopy operation.STEP 6 Press the PROG. COPY DAY button to enter thecopied program in the selected days.• The normal display returns.NOTE• If a program already exists in the copy destination day, the newly copied program overwrites the existingprogram.• If you accidentally copy over a program in the day program copy mode, holding down the CANCELbutton for more than 2 seconds returns the program to the point prior to pressing the PROG. COPY DAYbutton in STEP 1. (All changes and copy operations made up until that point are cleared.)OI-916-14-EG916_TCB-EXS21TLE_Book1.book 14 ページ 2007年8月21日 火曜日 午後3時20分