4-32 User’s ManualOperating Basics2. Before recording the video to DVD■ When you record DVD disc, please use only discs recommended bythe Drive manufacturer.■ Do not set the working drive to a slow device like a USB1.1 harddisk drive or it will fail to write DVD.■ Do not perform any of the following actions:• Operate the computer for any other function, including using themouse/TouchPad, or closing/opening the LCD panel.• Bump or cause vibration to the computer.• Use the Mode control button and Audio/Video control button toreproduce music or voice.• Open the DVD drive.• Install, remove or connect external devices, including thefollowing: ExpressCard, SD card, USB device, external display,i.LINK. devices and optical digital devices.■ Please verify your disc after recording important data.■ DVD-R/+R/+RW disc cannot be written in VR format.■ Output to VCD and SVCD format is not supported.3. About recorded DVDs■ Some DVD-ROM drives for personal computers or other DVDplayers may not be able to read DVD-R/+R/-RW/-RAM discs.■ When playing your recorded DVD on your computer, please useTOSHIBA DVD PLAYER software application.■ When playing your recorded Blu-ray Disc on your computer, pleaseuse WinDVD BD for TOSHIBA software application.■ If you use an over-used rewritable disc, the full formatting might belocked. Please use a brand new disc.
