Menu
Toshiba SL-5300 Series Owner's Manual
                                                                                                                                                                                                                                | |
Contents
|
24. ERROR MESSAGE TABLE EO1-3100924. ERROR MESSAGE TABLE24- 2(Continued)Error Message Cause SolutionPaper Feed Erroroccurs.Please adjust printposition.The label format doesn’t match the labelcassette or the print start position isincorrect.• Re-load the label.• Re-program the label format.Abnormal HeadTemp. is detected.Thermal head temperature is over thelimit.Leave the scale on for 3 minutes ormore, and then perform operations.Abnormal Headsource is detected.The power source for thermal head isincorrect because of the circuit failure.Turn off the power, and then ask yourauthorized TOSHIBA TECrepresentative.Unit Price is over thelimit.The Number of digits of the Unit Price isover the maximum limit.Re-program the Unit Price so that theNumber of digits is within the maximumlimit.The number of lettersis over the limit.The Number of characters is over themaximum limit.Re-program the name so that theNumber of characters is within themaximum limit.Format Read Erroroccurs.The selected label format cannot be readbecause of incorrect memory.Reset the label format in the label formatsetting mode.Format No. Erroroccurs.Press C key and setcorrect Format,please.Because unavailable Format No. isselected, the label format cannot read.Re-program a correct label formatNumber.Appointed code is notfound.The selected code doesn’t exist in the file. Enter a correct code which exists in thefile.Flash Rom Write Erroroccurs.Because of Flash-ROM failure, theselected data cannot be written into theFlash-ROM.Turn off the power, and then ask yourauthorized TOSHIBA TECrepresentative.Flash Rom FormatError occurs.Because of Flash-ROM failure, data in theFlash-ROM cannot be erased.Turn off the power, and then ask yourauthorized TOSHIBA TECrepresentative.No data is found. The selected item and data are not foundin the memory.Enter a correct Code Number.The File is full. There is no space for saving the selecteddata.Delete unnecessary PLU data from thefile.There is no File ofPLU Field information.Because the PLU file is damaged, theselected PLU cannot be called.Delete this PLU file, and then re-programthe PLU field.This position is overthe frame.The selected position is out of the labelformat area.Re-program the label format so that theprint position is within the format.MC Access Erroroccurs.File and folder information cannot betaken from the memory card.Turn off the power, and then ask yourauthorized TOSHIBA TECrepresentative.This Format is notselectable.The selected label format Number doesn’texist.Specify the label format Number which isavailable for this scale.Folder cannot bemade.The Number of digits of folder name isover 8 digits.Set the folder name with up to 8 digits ofalphabets and numeric. |
Related manuals for Toshiba SL-5300 Series
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved