15. SET UP MODE EO1-3100915.2 Label Format Setting15- 615.2.1 Free Format ArrangementWhen a format number is entered and the [FREE FORMAT] key on the bottom of the Label FormatSetting screen is touched, the following screen will appear. In this menu, you can change the printitems’ format and their print positions (X and Y).Format No. .............Selected format No.Format name ..........Selected format’s nameItem ........................Print items contained in the selected formatType .......................Print item’s current format typeExplanation.............Explanation of the format typeX (dot).....................X (horizontal) position of the print item’s lower left cornerY (dot).....................Y (vertical) position of the print item’s lower left cornerProcedureItem ProcedurePrint item’s image 1. Touch the Item area you desire to see.2. The selected print item’s Format Image screen is shown. (Refer tothe following page.)Type No. 1. Input a type number. (Refer to the Font Size Table on page 15-24.)2. Touch the Type area.NOTES:1. If an invalid type number is input, a buzzer sounds or an error occurs.2. The effective type number depends on the format No. or Item.Type Explanation 1. Touch Explanation area you desire to see.2. The print item’s format list is shown. (Refer to the Format Type ListScreen.)NOTE: The format type can be changed from this list. When changed, thetype No. is also changed accordingly.Item area Type area Explanation area X/Y positionFORMAT PRINT key
