Toshiba SD-V383SC Owner's Manual
OPERATION21Operation with tapeThis chapter describes how to operate the VCR andDVD.VCR Tape PlaybackPress the VCR button to select the device to be operat-ed.Basic Instructions1. Turn on the TV.2. Tune the TV to the DVD+VCR output channel (CH 3or 4) or if a direct VIDEO/AUDIO connection ismade between the DVD+VCR and the TV, set theTV’s source selector to VIDEO.3. Insert a pre-recorded video cassette.The indicator lights and the DVD+VCR pow-ers on automatically.4. If the (TIMER) indicator in the display window islit press POWER (I/1) once.5. If a tape without a safety tab is inserted the unitstarts playback automatically.If not, press PLAY (N).6. Press STOP (x) to stop playback. If the tape reach-es the end before you press STOP (x) theDVD+VCR automatically stops, rewinds and ejectsthe tape.Note:It is not necessary to select the tape speed for playbackbecause it is automatically selected by the DVD+VCR. Also,during playback the TV/VCR selector switches to VCR modeautomatically.Auto TrackingAutomatic tracking adjusts the picture to remove snowor streaks and beings when:• When the ATR (Auto Tracking) button is pressed.• A tape is played for the first time.• The tape speed (SP, LP, SLP) changes.• Streaks or snow appear due to scratches on thetape.Manual TrackingTo manually adjust the tracking use theCH/TRK (v/V) buttons on the remote control orCH (v/V) on the front panel during playback.Notes:• Vertical jitter requires a very fine adjustment.• Tracking is automatically reset to normal when the tape isejected or the power cord is unplugged for more than 3seconds.SearchThis function lets you visually search for a tape sectionin either direction: forward and reverse. During the high-speed picture search modes, the audio is muted andhorizontal lines (noise bars) appear. Also, a short time isneeded to stabilize the tape speed when re-entering thePLAY mode so slight interference may be observed dur-ing this time.To search:1. Press REW (m) or FWD (M) during playback.2. To return to playback, press PLAY (N).Still Picture and Frame-by-Frame Playback1. Press PAUSE/STEP (X/C) during playback.A still picture appears on the TV screen and theaudio is muted.2 If the still picture vibrates vertically, stabilize it byusing CH/TRK (v/V) on the remote control.3. Press PAUSE/STEP (X/C) repeatedly to advancethe video picture one frame at a time.4. To return to playback, press PLAY (N).Note:After 5 minutes in STILL mode the DVD+VCR stops toprotect the tape and video heads. |
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved