Toshiba SD-V383SC Owner's Manual

16TUNINGThis DVD+VCR is equipped with a frequency synthe-sized tuner capable of receiving up to 181 channels.These include VHF channels 2-13, UHF channels 14-69and CATV channels 1-125.Auto Channel Programming1. Choose the SOURCE SELECT option, then use b/Bto select TUNER.Use b/B to switch among TUNER, LINE1, and LINE2.2. Choose the AUTO CHANNEL SET option, then useb/B to find channels.• The tuner will automatically cycle through all availablechannels (TV/CATV) in the area and place them in thetuner’s memory.• After the AUTO CHANNEL SET is complete, theTUNING menu will hide and return to the TV screenautomatically.3. Make sure the TUNING BAND is set appropriately(TV or CATV).• TV : If you are using a standard antenna to receivechannels.• CATV : If you are using basic cable to receive channels.To Add or Erase ChannelsThis feature allows you to add or erase channels frommemory manually.1. Choose the CH. ADD/DEL option, then use b/B toselect a channel to add or erase.2. Use ENTER to add or erase the channel.Repeat steps 1 and 2 to add or erase otherchannels.3. Press VCR MENU to return to the TV screen.SETUPFUNCTION OSDThe on-screen display can be turned on or off.AUDIO MODEThe DVD+VCR has two separate audio playback sys-tems, the high quality VHS Hi-Fi system and standardNORMAL mono system. The same audio is generallyrecorded on both systems. The VHS Hi-Fi system playson separate (left and right) channels, and the NORMALsystem plays monaural sound. The normal track isalways played so the cassette can be played on aDVD+VCR that does not have VHS Hi-Fi.BROADCAST TYPE (STEREO / SAP / MONO)Multichannel Television Sound (MTS) carries stereoand/or Second Audio Program (SAP) bilingual signals.Set this display to the desired position when both MTSstereo and SAP signals are received. When only one ofthe MTS signal is received, the DVD+VCR automaticallyselects the corresponding receiving mode (Stereo orSAP) regardless of the selected position. For normaloperation, the display should be in the STEREO posi-tion. The DVD+VCR will then record a STEREO pro-gram when available, and record a mono program IFthe program is NOT IN STEREO. For weak STEREOand/or SAP broadcasts, changing the display to monomay give clearer sound.AUDIO OUTPUT (STEREO / LEFT / RIGHT)Used during playback [when AUDIO MODE (HI-FI/NOR-MAL) is in HI-FI position] for selecting the audio outputsignals from the AUDIO OUT terminals (L ch and R ch),and RF.OUT. This display setting should normally be leftin the stereo position, so that when a stereo tape isplayed, the stereo sound will be heard through the leftand right channels. If a mono tape is played and theaudio output is set to stereo, the same mono sound willbe heard from both left and right channels.Initial Settings - VCR (Continued)

/ 42

This manual is suitable for:

SD-V383SC

Toshiba SD-V383SC Owner's Manual

Product

Learn More

Legal