Toshiba RL939 Digital Series Manual

38CONTROLS AND FEATURESEnglishb Press B or b to select Wireless Setup and press OK.c Press B or b to select Assisted Setup and press OK.d Press B or b to select the desired AP and press OK.NOTE: Check the MAC address on the label of the APor in the manual, and select your AP.e Highlight Security Key and press OK. The SoftwareKeyboard window will appear.f Input the Security Key by using the SoftwareKeyboard (see page 41). To save your setting, pressthe BLUE button.NOTE:• The Security Key must adhere to these conditions:- TKIP/AES: 8-63 ASCII or 64 Hex characters- WEP: 5 or 13 ASCII or 10 or 26 Hex characters• There is only one key ID to set for WEP encryption.g Highlight Done and press OK.NOTE: If Network Name is not displayed, see step 3and 4 in Manual Setup below to set Network Namebefore pressing Done.NOTE: Settings are not saved if BACK is pressed before Doneis selected.Manual Setupa In the Preferences menu, press B or b to selectNetwork Setup and press OK.b Press B or b to select Wireless Setup and press OK.c Press B or b to select Manual Setup and press OK.d Press B or b to select Network Name and press OK.The Software Keyboard window will appear.e Input the Network Name by using the SoftwareKeyboard (see page 41). To save your setting, pressthe BLUE button.f Press B or b to select Authentication and press C orc to select Open System, Shared Key, WPA-PSK orWPA2-PSK.g Press B or b to select Encryption and press C or cto select None, WEP, TKIP or AES.NOTE:• Certain encryption types are only compatible withspecific authentication types.- When Authentication is Open System, only WEPor None is compatible.- When Authentication is Shared Key, only WEP iscompatible.- When Authentication is WPA-PSK or WPA2-PSK,only TKIP or AES is compatible.• When incompatible Authentication/Encryptionpairings are detected, a warning message will bedisplayed, and no connection attempt will be madeuntil the incompatibility is resolved.• There is only one key ID to set for WEP encryption.h Press B or b to select Security Key and press OK.i Input the Security Key by using the SoftwareKeyboard (see page 41). To save your setting, pressthe BLUE button.NOTE: This item is grayed out when Encryption isNone.j Highlight Done and press OK.NOTE: When Encryption is None, a message willappear. Press C or c to select Yes and press OK.NOTE: Settings are not saved if BACK is pressed before Doneis selected.Wireless InformationThe settings configured in Wireless Setup can be confirmed.a Press QUICK to open the Quick Menu.b Press B or b to select Wireless Information andpress OK.c When the Network Type is Wireless, a WirelessInformation window will appear.NOTE: Press the RED button to scan for all APs.Easy SetupManual SetupWireless SetupAssisted SetupQuick MenuMore InformationSpeakersChannel OptionsHDMI CEC Device ControlIntel® Wireless DisplayWireless InformationTV SpeakersHeadphone LevelSleep Timer 00:0050