Menu
Toshiba NetPac Installation And Operation Manual
                           | |
Contents
|
NetPac Wireless System 9orientation and that all mating pins are seated fully anduniformly.5. Insert the Series-2 Module(P/N 64709) into the Adapter Board — ensure that themodule is inserted with the correct orientation and that allmating pins are seated fully and uniformly.6. Close the front door or reattach the front cover (device-specific).7. Apply system/ASD power.Note: CNU1 of the control board CANNOT be usedwhile using the Toshiba NetPac Wireless System.RJ-45 Transceiver Installation1. Perform steps 1 and 2 ofthe Series-2 TransceiverModule Installation onpage 8.2. Insert the transceivermodule into the RJ-45connector of the 7-Series (CNU1) or 9-Series (S4) ASDterminal board.PC USB Transceiver Installation1. Insert the USBTransceiver Moduleinto any unused USBport of the PC.Once the module isproperly inserted intothe USB port of the PC, the Found New Hardware Wizarddialog box appears.2. Continue to step 1 of the Software Installation andVerification on page 11. |
Related manuals for Toshiba NetPac
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved