4 NetPac Wireless Systemmay result in serious injury, severe property and equipmentdamage, or loss of life if safe procedures or methods are notfollowed as outlined in this guide.Qualified PersonnelInstallation, operation, maintenance, and disposal are to beperformed by Qualified Personnel only. A qualified person isone that has the skills and knowledge relating to the construction,installation, operation, and maintenance of the electricalequipment and has received safety training on the hazardsinvolved (refer to the latest edition of NFPA 70E for additionalsafety requirements).Qualified Personnel shall:• Have carefully read and understood all of the user directionsthat are contained in this guide and the installation andoperation manual of the ASD being utilized.• Be familiar with the construction and function of the ASD,the equipment being utilized, and the hazards involved.• Be able to recognize and properly address hazards associatedwith the application of motor-driven equipment.• Be trained and authorized to safely energize, de-energize,ground, lock out/tagout circuits and equipment, and clearfaults in accordance with established safety practices.• Be trained in the proper care and use of protective equipmentsuch as safety shoes, rubber gloves, hard hats, safety glasses,face shields, flash clothing, etc., in accordance withestablished safety practices.For additional information on workplace safety, visitwww.osha.gov.Equipment Inspection• Upon receipt of the equipment inspect the packaging andequipment for shipping damage.