Toshiba MicroMAS Installation Manual

Also see for MicroMAS: Specifications

MicroMAS Installation GuideInstallation18 Micro MAS Installation Guide 4/07Step 14D: Activate Licenses³ To activate the licenses, click Activate Licenses. A warning box displays telling you that theMicroMAS operating system will be shut down and rebooted. The MicroMAS attempts to shutdown and reboot immediately.Important! During the activation process, the MicroMAS cannot be processing calls. Anycurrent connection being processed by the MicroMAS is disconnected. In order notto disrupt daily activity in your customer’s business, you can choose to do theactivation process unattended during the evening/early morning hours by schedulingthe procedure using the Windows scheduling process.Note If you have purchased a VCS license, then use VCS Manager to activate the license.Refer to the VCS Installation, Programming and Maintenance Manual to upload andactivate the VCS license.Step 14E: Log out of eManager³ From the eManager Menu, click Logout to exit eManager.Step 14F: Set MicroMAS Static IP AddressThis procedure is used to change the MicroMAS static IP Address from the default setting. TheMicroMAS must be mounted in the rack, the power cord plugged in and the IP cable installedbetween the MicroMAS and the IP switch (LAN).Note This procedure requires a monitor, keyboard and mouse connected directly to theMicroMAS. Refer to Figure 3 on Page 5.1. At the MicroMAS console select Start > Control > Panel > Network and Internet connection.Click on Network Connection.2. Right click on Local Area Connection for labeled Intel PRO/1000MT Network Connection.Then select Properties.3. Highlight Internet Protocol (TCP/IP) then click on the Properties button.4. Select “Use the following IP address,” then enter the following:• IP Address:• Subnet Mask:• Default Gateway: 5. Click OK.Step 14G: SES Voice Mail and ACD SetupWhen the MicroMAS reboots log in to eManager. Refer to the Programming Manual Volume Onefor setting up user accounts. Then program the CIX for SES and ACD applications as appropriate.Refer to the VCS Installation, Programming and Maintenance Manual for VCS setup.