Toshiba LF620F Instruction Manual

Also see for LF620F: Manual Manual Manual Instruction manual

－ 84 －6 F 8 A 0 9 2 8Switch operation Display example DescriptionSTEP2 DO1 FUNCH ALMThe switches at the bottom change.( are shown.)At the same time, the cursor appears.(The item indicated by the cursor ishighlighted.)Then push .STEP3 DO1 FUNCL ALMYou can continue to change the setting item.Push to change the selectionitems.: Selected item is scrolled up.: Selected item is scrolled down.When the desired item is selected, pushto set the item temporarily.STEP4(=END) DO1 FUNCL ALMSET OK?When you push , a message appearsto confirm whether the setting is OK or not.If OK, push . If you want to redo thesetting, push .Pushing cancels the setting operationand exits the setting screen.8.2.19 Digital InputDigital input functions can be selected.You can select the digital input function from the table shown below.For details of digital input functions, see 10, “Functional Description.”●Digital input functionsSelection items Digital input functionsNO USE Not usedCNT ST/SP Totalizer Start / StopCNT RS/ST Totalizer Reset / StartRNG SW Remote selection switch of multiple rangesZERO ADJ Still water zero adjustment startFIX OUT Fixed output mode controlN OO KESCO KN OESCBuy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com