6F8A0917- 169 -15.2 Model Number TableLF232*A, LF232*B Converter model number tableModel number Specification code1 2 3 4 5 6 7 8 9 10 11 12DescriptionL F 2 3 2 Separate type converterPurposeA StandardCompatible detector (Note 1) (Note 2) (Note 3)A Medium to small size (Meter size: 1/10” to 18”(2.5 to 450mm))B Large size (Meter size 20” to 120” (500 to 3000mm))Mounting nuts and boltsC Panel, wall mounting (BNP material: SUS304)E Pipe mounting (BNP material: SUS304)Digital input/output1 Current output+ Digital outputs points (1 point)3 Current output+ Digital outputs points (4 point) + Digital nputs points (2 point)Communication function1 HART communicationPower supply1 100 to 240VAC, 50/60Hz (Note 2)2 24VDC (Note 3)A Standard• Note 1: For applicable detector code, select one from the following table.To combine with an existing detector, select one depending on the type of replaceable converters.For combination with detectors not listed below, contact Toshiba.Applicabledetector codeApplicabledetectorApplicable detector(discontinued model) Replaceable convertersA LF470 type334,335 type (Converters oftypes shown right)372, LF200, LF220,LF420, LF230* A typeB LF150 type337,335 type (Converters oftypes shown right)373, 378, LF230* B type• Note 2: When the 7th digit is “B” and power supply specification code is “1”, power supply specificationis 100 to 120VAC.• Note 3: 24VDC can be specified only when the 7th digit is “A”.
