Toshiba IP4100 Installation Manual

Also see for IP4100 Series: User guide User guide Product bulletin

Contents

GENERAL SYSTEM CONFIGURATION Powering on the Handset1-12 IP4100 Install Sept., 2013GENERAL SYSTEMCONFIGURATIONImportant! This document does not cover general IP and SIPnetwork setup. If you need more information on thenecessary settings for your servers, contact your networkadministrator.Change Configuration and Management Settings1. In the left panel of the screen, select Management. This opens theManagement screen.2. In the Base Station Name field, enter the title you want to appear inthe configuration screens for this base station. (This will help youverify that you have logged into the correct base station in the future.)The title can be any HTML-readable text string.3. In the Configuration server address field, enter the IP address or URLof the server that hosts SIP log files (this is usually your TFTP server).The base station will also copy its debug files to this sever. The TFTPServer must be running for SIP log file uploads.4. Under Management Transfer Protocol, select TFTP.5. HTTP management is reserved for system development; just ignorethese fields.6. If you want to have this base station copy SIP messages onto theconfiguration server, select Enabled in the Upload of SIP Log field.SIP logs are named in the format of{MAC_address}_SIP_{timestamp}.log (Unless you aretroubleshooting a specific problem, you should leave this Disabled.)7. Trace server information is reserved for system development; justignore these fields.8. To have this base station copy system log messages onto a systemlog server, enter the IP address of the server in the Syslog Server IPAddress field. (If your syslog server is listening to a port other than thedefault, enter that port number in System Syslog Port.) Then, in theSyslog Level field, select one of the following:• Off: no system events are logged.• Normal Operation: This will output normal operation eventlogs targeted for an administrative audience. Event logs