Toshiba HDR5010KB Quick Start Manual

Also see for HDR5010KB: Owner's manual Owner's manual Quick start guide

Contents

• Use the batteries supplied and check the positive/negative symbols on the batteries to ensure theyare inserted correctly in the remote control.Note:• A label with support information is located on the back of the remote control.qwePackage ContentsInserting the Batteries into the Remote ControlConnecting Equipment to the Rear of the RecorderHDR5010KBQUICK START MANUAL© 2010 Toshiba Corporationq Digital TV recorder w Remote control e Batteries (2xR3/AAA) r AC mains adaptert Owner’s manual y Quick start guide u Help leafletqw ertq Plug your aerial lead into the RF IN socket of the recorder.w If required, plug a RF cable between the RF OUT socket of the recorder and your TV, Video orDVD recorder. Cable not supplied.e Plug a HDMI cable between the HDMI OUT socket of the recorder and your TV. Cable notsupplied.r Plug the supplied AC mains adapter between the power socket of the recorder and a standardwall socket. Only switch on the wall socket when all cables have been attached.Please refer to page 13 of the User Guide for information on connecting equipment usinga HDMI cable, a SCART cable, a USB Flash drive or an audio system using a SPDIF cable.rw eqyuDigital TV recorderHDR5010KBQUICK START GUIDE© 2010 Toshiba CorporationHD5010KB Quick Start Guide.indd 1 22/07/2010 10:46

/ 2

Related manuals for Toshiba HDR5010KB