10 ENSection 2Getting StartedLoading the BatteryBefore using the camcorder, users must load the Lithium-ion rechargeable battery come within the package.Insert the battery according to the correct polarity1.marks (+ or -).Close the battery cover firmly.2.NotePlease remove the insulator on battery connectionbefore use.Inserting and Removing an SD Card (Optional)The camcorder comes with an internal memory which allows you to store pictures and movies. Youcan expand the memory capacity by using an optional SD/SDHC memory card.Insert the memory card into the slot. Please refer to the1.figure on the right side.To remove an installed SD card, press the card inwards2.to release it.When the card pops out, gently remove it from its slot.3.Recommended memory capacity: 1GB or above.4.NoteWhen a memory card is fitted, movies/pictures are saved on the card rather than on the built-•in memory.Protecting Data on an SD Card: SD Card is read-only when it is locked. No pictures or•movies can be recorded when the SD card is locked. Make sure the lock is on the writeableposition before recording any media.WriteablepositionWrite-ProtectedPositionDownloaded From VideoCamera-Manual.com Manuals