8BEFORE USINGHow to Mount the Filter Unit1 Detach the panel.1 Hold fingers at the ledges onboth sides,2 Pull to the front.3 Pull out the filter unit.HOW TO INSTALLWhen You Install on FurnitureThe place to install should be chosen from the placewhere air in the room circulates and a smoker isnearby.ATTENTION•Do not cover the air intake or the air outlet. The purified airwill not circulate around the room and this may be thecause of the deterioration of performance or a breakdown.•Install the product at least 2 m away from a TV or stereoset. In order to prevent noise and picture noise, if thereceiving sensitivity is not good, move this productfarther away till the noise diminishes. If the direction,length, shape of the antenna is changed, sometimes thenoise may diminish.•Do not use this product in place of a fan in the kitchen.The life of filter will become extremely short, or may bethe cause of transformation.2 Bring the filter unit anddeodorant filter out ofthe plastic bag andmount it to the body.• Remove the plastic bagcompletely.• Pay attention to the orientationof the filter.• It would be convenient to fill inthe mounting month.3 Bring the Pre Filtermount it to the body.Flow of air•Do not use in the kitchen. Sensor will be tarnished withoily smoke and the sensitivity of the sensor will becomeunstable.•Do not install the product near heating equipment.Plastic parts can be transformed, or fire may be windedwhich may pose danger.•Do not operate without filter unit mounted. This does nothave purifying effect. This is also the cause of abreakdown.•As time goes by, the installed place or walls may get dirty.•Do not use at the place with flammable gas, corrosive gasor metal dust. They may be the cause of breakdown.4 Attach the panel.1 Hang the convex of top insideof the panel to the concaveportions (3 positions).2 Press the panel bottom untilthe click sound is heard.LedgeFilter UnitHookPreFilterFilterUnitPre FilterConcave portionsFilterUnitDeodorantFilterDeodorant FilterDeodorantFilterHookDeodorantFilter