Toshiba B-850 Owner's Manual

Contents

2. PRINTER SETUP EO1-330292.7 Loading the Media2-102.7.3 Loading Media into thePrinter (Cont.)2. Release the Print Head Block by pressing down on the Head BlockRelease Lever c as shown below.3. Raise the Print Head Block to its fully open position as shown by thearrow d in the diagram below.4. Release the Paper Guide Locking Levers on the two Paper Guides asshown in the figure below.5. Grasp the right hand Paper Guide and move it to the right to open thePaper Guides wide enough to accept the media.6. Feed the media between the two guides.7. Feed the paper under the Upper Sensor Ass’y and pull the paper untilit extends past the Platen. (until it extends past the cutter outlet whenthe optional Cutter Module is attached.)8. Grasp the right Paper Guide and move it to the left to close both PaperGuides and automatically center the media.9. Press the Paper Guide Locking Levers to lock the Paper Guides inplace.CAUTION!Be careful not touch thePrint Head Element whenraising the Print HeadBlock. Failure to do thismay cause missing dotsby static electricity orother print qualityproblems.12Head BlockRelease LeverPrint Head BlockPrint HeadElementLock FreePlatenPaper GuideLocking LeverPaper GuideUpper SensorAss’yPaper Guide•The Print Head maybecome hot. Do nottouch the Print Head.•Risk of injuries. Do nottouch moving parts.Disconnect the mainsbefore maintenance ofribbon and media.WARNING!