Menu
Toshiba 55L544 DG Series Online Manual
                                                            |
English - 16 -EnglishInitial Installation - continuedYou can select Network, Frequency, NetworkID and Search Step from this screen. Forhighlighting lines you see, use Up or Down button.You can set Search Step as 8000 kHz or 1000kHz. If you select 1000 kHz, the TV will performsearch process in a detailed way. Searchingduration will thus increase accordingly. Whenfinished, press OK button to start automaticsearch.If you select NO, the following screen will bedisplayed:You can set Start - Stop Frequencies and SearchStep as desired. When finished, press OK buttonto start the search.9. If you select Aerial option from the Search Typescreen, a confirmation message will be displayed.If you want to continue with searching select Yes,the television will search for avai̇lable broadcasts.Select No to exit.10. The Auto tuning screen will appear and thetelevision will start to search for available stations.The progress bar will move along the line. Youmust allow the television to complete the search.Note: You can press MENU button to cancel.11. If you select Satellite option from the Search Typescreen, Antenna Type menu will be displayed.There are three types of antenna selection. Youcan select Antenna type as Direct, Unicableor DiSEqC.Direct: If you have a single receiver and a directsatellite dish, select this antenna type. After selectingDirect, another menu screen will be displayed.Select an available satellite and press OK to scanfor services. If wanted, the default LNB frequencyvalues for the selected satellite can be editedbefore starting the search. The frequency valuescan be entered in two ways:• The high band value should be “0” and the lowband value should be entered.• The high and low band values should be thesame, so this value can be used in search. Butthis value cannot be “0”.These are the standard single LNB searchrequirements.Unicable: If you have multiple receivers and aunicable system, select this antenna type. PressOK to continue. Configure settings by followinginstructions on the screen. Press OK to scan forservices.DiSEqC switch: If you have multiple satellitedishes and a DiSEqC switch, select this antennatype. After selecting DiSEqC switch, anothermenu screen will be displayed. You can set fourDiSEqC options (if available). Press GREENbutton to scan all satellites or press YELLOWbutton to scan only the highlighted satellite. Tosave and exit press OK button. |
Related manuals for Toshiba 55L544 DG Series
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved