Toshiba 4818-T10 Operating System Installation Manual

Also see for 4818-T10: User manual Service manual User manual

2. Installing Windows 10 (32 and 64 bit)The Windows 10 installation process fully supports the Toshiba Global Commerce Solutions 4818-T10Models. No special considerations need to be made when installing the operating system. You can use thefollowing method to install the operating system.RequirementsWindows 10 installation DVDUSB Keyboard and MouseExternal USB CD/DVD drive (if DVD feature not installed)Configuring BIOS setupTo configure BIOS setup, complete the following steps:1. Power on the system and enter BIOS setup by pressing the ~~key during~~ POST.2. Enter the 'Advanced’ page.3. Set the ‘OS Selection’ item to ‘Windows 8.X/10’ option.4. Press key to save and restart.Installing the Windows 10 driversToshiba Global Commerce Solutions required drivers for Windows 10Intel INF (Chipset) DriverIntel VGA DriverRealtek Audio DriverRealtek Ethernet DriverIntel TXE DriverNuvoton Serial DriverInstall the drivers in the following order.1. Install the Intel INF (Chipset) Driver2. Install the Intel VGA Driver3. Install the Realtek Audio Driver4. Install the Realtek Ethernet Driver5. Install the Intel TXE Driver6. Install the Nuvoton Serial DriverIf USB 3.0 operation is required, an additional BIOS setting must be modified. Follow the steps below to configurethe system for USB 3.0 operation.To configure BIOS for USB 3.0 operation, complete the following steps:1. Power on the system and enter BIOS setup by pressing the ~~key during~~ POST.2. Enter the 'Advanced’ page.3. Enter the 'South Cluster Configuration’ sub-page.4. Enter the 'USB Configuration’ sub-page.5. Set the 'XHCI mode' item to ‘Enable' option.6. Press key to save and restart.

/ 3

Related manuals for Toshiba 4818-T10