Toshiba 46WM48 - 46" Rear Projection TV Owner's Manual

Also see for 46WM48 Series: Quick set up guide and remote control

English19Input selection and AV connectionsDefining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6for a clear view of the back connection recommendations.Select AV connection.Use S or R to change the EXT3 output option to:TV = The last television programme selection.Monitor = The picture on screen.EXT1 = The picture from equipment connectedto SCART 1.EXT2 = The picture from equipment connectedto SCART 2.EXT5 = The picture from equipment connected tothe side input sockets.This enables selection of the source to output fromSCART 3. For example, to record transmissions in stereofrom a stereo decoder – connect a stereo decoder toSCART 1 and stereo VCR to SCART 3, then select EXT1 asthe EXT3 output. The signal received through SCART 1will output directly through SCART 3.Most VCRs and decoders send a signal through theSCART lead to switch the television to the correct Inputsocket. Alternatively press the external source selectionbutton Buntil the picture from connected equipment isshown. This button must be used to view equipmentconnected using the COMPONENT VIDEO INPUT (EXT4).An S in the display e.g. B3S (EXT 3S), indicates theinput is set for an S-Video signal.Use the Input Selection if the television does not switchover automatically.Input selectionOUTPUT signal selection for SCART 31This specifies the type of signal going into SCART 3 (EXT3)on the back of the television. Please refer to themanufacturers instructions for the connected equipment.In the SET UP menu press Q untilAV connection is highlighted, then press OK.With S or R select either AV or S-VIDEO as therequired input for EXT3.If the colour is missing try the alternative setting.INPUT signal selection1122AV connectionEXT3 input AVEXT3 output EXT1Woofer ExternalAudio output FixedMENU Back EXIT Watch TVAV connectionEXT3 input AVEXT3 output EXT1Woofer ExternalAudio output FixedMENU Back EXIT Watch TVPress B to select B1, B2, B3, B4C, B5(EXT1-5), HDMI or PC.HDMI™ displays equipment connected to InputHDMI on the back of the television. It is designedfor best performance with 1080i high definitionsignals.PC displays a computer connected to InputRGB/PC on the back of the television.To return to television mode press B again orone of the numbered buttons.To bring up the EXT menu, press and hold B.HDMI, the HDMI logo, and High-Definition MultimediaInterface are trademarks or registered trademarks of HDMILicensing, LLC.