Toshiba 2060 Service Handbook

Also see for 2060: Manual Operator's manual Manual

Contents

2060, 2860/70 ADJUSTMENT 1 - 8 Dec. 1996 © TOSHIBA CORP.Group111111222223333333333322333333*1*1 The exposure lamp stays on for 5 sec., then goes off automatically.Code Function Code Function1 Main motor ON 11 OFF2 Feed roller clutch ON 12 OFF3 Aligning roller clutch ON 13 OFF6 Toner motor ON 16 OFF7 Optical fan ON 17 OFF8 Exit fan/Bottom fan ON 18 OFF10 Total counter Increases at each “P” key press.20 Scanning motor At 1st “P” key press, scans forward and backward at 2nd press.21 Lens motor At 1st “P” key press, moves to 50% position and to 200% positionat 2nd press.22 Mirror motor At 1st “P” key press, moves to 50% position and to 200% positionat 2nd press.24 Document motor At 1st “P” key press, moves to 50% position and to 200% positionat 2nd press.30 Charge output At 1st “P” key press, comes on and goes off at 2nd press.31 Transfer output At 1st “P” key press, comes on and goes off at 2nd press.32 Separation output At 1st “P” key press, comes on and goes off at 2nd press.33 Exposure lamp At 1st “P” key press, comes on and goes off at 2nd press.34 Pre-transfer bias At 1st “P” key press, comes on and goes off at 2nd press.40 Copier upper cassette tray motor Tray only rises.41 Copier upper cassette feed roller clutch At 1st “P” key press, comes on and goes off at 2nd press.42 Copier transport clutch At 1st “P” key press, comes on and goes off at 2nd press.43 Copier lower cassette tray motor Tray only rises.44 Copier lower cassette feed roller clutch At 1st “P” key press, comes on and goes off at 2nd press.45 ADU stopper end motor Reciprocates at each “P” key press.46 ADU side end motor Reciprocates at each “P” key press.47 ADU feed roller clutch At 1st “P” key press, comes on and goes off at 2nd press.48 ADU stack clutch At 1st “P” key press, comes on and goes off at 2nd press.49 PFP upper cassette tray motor Tray only rises.50 PFP upper cassette feed roller clutch At 1st “P” key press, comes on and goes off at 2nd press.51 PFP transport clutch At 1st “P” key press, comes on and goes off at 2nd press.52 PFP middle cassette tray motor Tray only rises.53 PFP middle cassette feed roller clutch At 1st “P” key press, comes on and goes off at 2nd press.1.2.2 Output signal check (03/04)In the “03” or “04” test mode, the following output signal conditions can be checked by entering appro-priate codes.