Toro Titan HD 136-1682 Installation Instructions Manual

Form No. 3406-430 Rev BTrimmer Mount KitTitan® HD Series Riding MowerModel No. 136-1682Installation InstructionsWARNINGCALIFORNIAProposition 65 WarningThis product contains a chemical or chemicals known to the State of California tocause cancer, birth defects, or reproductive harm.InstallationLoose PartsUse the chart below to verify that all parts have been shipped.Description Qty. UseNo parts required – Prepare the machine.Rear bracket 1Nut (1/4 inch) 6Large backer plate 1Large fist clamp 1Large fist-clamp bracket 1Bolt (1/4 x 5/8 inch) 2Bolt (1/4 x 1-1/2 inches) 2Bolt (1/4 x 1-1/4 inches) 2Small fist clamp 1Small backer plate 1Carriage bolt (5/16 x 7/8 inch) 3Small fist-clamp bracket 1Trimmer plate 1Nut (5/16 inch) 2Channel bracket 1Mount plate 1Knob 1Assemble the kit.Bolt (3/8 x 7/8 inch) 2Nut (3/8 inch) 2Carriage bolt (3/8 x 3 inches) 1Wide-flange nut (3/8 inch) 1Mount the kit to the machine.No parts required – Secure a trimmer to the mount assemblies.© 2016—The Toro® Company8111 Lyndale Avenue SouthBloomington, MN 55420Register at www.Toro.com. Original Instructions (EN)Printed in the USAAll Rights Reserved *3406-430* B