Toro LT2240 Installation Instructions Manual

Form No. 3440-878 Rev AVinyl or Fabric Air Ride Seat KitLT2240 Compact Triple 4-Wheel Drive Turf Mower, LT3340 TripleReel Mower, or LT-F3000 Triple Flail MowerModel No. 02875—Serial No. 400000000 and UpModel No. 02876—Serial No. 400000000 and UpInstallation InstructionsInstallationLoose PartsUse the chart below to verify that all parts have been shipped.Procedure Description Qty. Use1 No parts required – Prepare the machine.2 No parts required – Remove the existing seat (model31654).3 No parts required – Remove the existing seat (models31657 and 31659).4 Seat and suspension assembly 1 Prepare the new seat (model 31654).5 Seat and suspension assembly 1 Prepare the new seat (models 31657and 31659).Locknut (8 mm) 46 Hex-head bolt (8 x 25 mm) 4 Install the seat (model 31654).Hex-head bolt (8 x 25 mm) 47 Locknut (8 mm) 4Install the seat (models 31657 and31659).Standard fuse (10A)—Model 31654 18 Mini fuse (10 A)—Models 31657 and31659 1 Connect the electrical components.9 No parts required – Complete the seat kit installation.© 2021—The Toro® Company8111 Lyndale Avenue SouthBloomington, MN 55420Register at www.Toro.com. Original Instructions (EN)Printed in the USAAll Rights Reserved *3440-878*