Form No. 3412-757 Rev BGroundsmaster® 5900 or 5910 Rotary MowerModel No. 31698—Serial No. 400000000 and UpModel No. 31699—Serial No. 400000000 and UpSoftware GuideRead this information carefully to learn how to operate the InfoCenter control on your product. You areresponsible for operating the product properly and safely.You may contact Toro directly at www.Toro.com for product safety and operation training materials, accessoryinformation, help finding a dealer, or to register your product.IntroductionThe Software Guide for the Groundsmaster® 5900 or5910 rotary mower provides information for using thesystem information and control the system functions.ContentsIntroduction ............................................................... 1Product Overview ..................................................... 1Controls ............................................................. 1Operation .................................................................. 2InfoCenter Control.............................................. 2Accessing the Protected Menus.......................... 5Changing the InfoCenter PIN.............................. 7Changing the InfoCenter DisplayBrightness/Contrast........................................ 9Setting the Cruise-Control Speed ....................... 9InfoCenter Advisories....................................... 10Product OverviewControlsInfoCenter Startup ScreenWhen you start the machine, the startup screenappears, displaying the corresponding icons that apply(i.e., the parking brake is applied, the PTO is in the ONposition, and the cruise control is in the ON position).Note: The following figure is an example screen; thisscreen is meant to show all the potential icons thatcould appear on the screen while operating.Refer to the following graphic for all of the iconmeanings (Figure 1).© 2017—The Toro® Company8111 Lyndale Avenue SouthBloomington, MN 55420Register at www.Toro.com. Original Instructions (EN)Printed in the USAAll Rights Reserved *3412-757* B