Toro Groundsmaster 5900 Software Manual

Also see for Groundsmaster 5900: Operator's manual Operator's manual Quick start guide Operator's manual Operator's manual

Contents

Machine sends a request to the InfoCenter• The engine sends a red, stop lamp messageNote: If the alarm stops or if the operatoracknowledges the alarm by pressing any buttonon the InfoCenter, then the alarm should stop.• Regeneration requested by the engine• Any engine fault• Any advisory; refer to InfoCenter Advisories (page10)• The engine sends an amber warning message• The fuel level is below 2.2%Main MenuPress and hold the fifth button (far right) on theInfoCenter to access the main menu.From the main menu screen, you can access theService screen, Diagnostics screen, Settings screen,or the About screen (Figure 6).G033167g033167Figure 6Service ScreenIf you have an issue that requires use of the Servicescreen (i.e., calibrating the traction pedal), contactyour Toro distributor for assistance.Accessing the ProtectedMenusNote: The factory default PIN code for you machineis either 0000 or 1234.If you changed the PIN code and forgot thecode, contact your Authorized Toro Distributor forassistance.• 5900• 12341. From the HOME SCREEN, press buttons eitherbuttons 1, 2, 3, or 4 to access the pop-up menubar at the bottom of the screen (Figure 7).g214880Figure 72. Press and hold button 5 to access the MAINMENU (Figure 8).5