Toro Groundsmaster 4000 Series Installation Instructions Manual

Also see for Groundsmaster 4000 Series: Installation instructions Operator's manual Installation instructions Installation instructions

Form No. 3422-333 Rev AWing Mount KitGroundsmaster® 4000 Series Rotary MowerModel No. 137-5580Installation InstructionsInstallationLoose PartsUse the chart below to verify that all parts have been shipped.Description Qty. UseNo parts required – Prepare the machine.Deck mount 1Plate 1Spring pin 1Spacer 2Bolt (3/4 x 4-1/2 inches) 1Locknut (3/4 inch) 1Cable tie 1Install the kit.Determine the left and right sides of the machine fromthe normal operating position.Preparing the Machine1. Park the machine on a level surface.2. Disengage the power takeoff and lower theattachments.3. Engage the parking brake.4. Shut off the engine and remove the key.5. Wait for all movement to stop.6. Allow machine components to cool.© 2021—The Toro® Company8111 Lyndale Avenue SouthBloomington, MN 55420Register at www.Toro.com. Original Instructions (EN)Printed in the USAAll Rights Reserved *3422-333*

/ 4

Related manuals for Toro Groundsmaster 4000 Series