Toro 22317 Service Manual

Also see for 22300: Operator's manual

Contents

ALL UNITS/GENERAL3/1-49Toro Wheeled CUL Service Manual37. Insert the tab end of the retaining ring through thenotch in the barrel and into the hole in the groove ofthe head. Place the spanner wrench onto the headassembly (Fig. 0176).Fig. 0176 IMG-0368a38. Begin rotating the spanner wrench clockwise so thatthe head pulls the ring inside the barrel. Continuerotating until the ring is completely installed thebarrel on the head assembly (Fig. 0177).Fig. 0177 IMG-0321a36. Continue rotating the head until the ring hole inthe ring groove is within the slot on the barrel (Fig.0175).34. Remove the rod from the vise and secure thecylinder barrel into the vise.35. Install the ram assembly into the cylinder barrel byrotating the head assembly while pushing the headinto the barrel (Fig. 0174).Fig. 0174 IMG-0366aFig. 0175 IMG-0367a