34Problem Corrective ActionPossible CausesTraction unit does not drive. 1. Flow divider valve lever is inthe 9 o’clock position.1. Move the lever to the 12 to 10o’clock position.2. Tow-valves are open. 2. Close the tow-valves.3. Hydro fluid level low. 3. Add hydro fluid to reservoir.4. Traction pump drive coupler isloose or broken.4. Contact Service Dealer.5. Pump and/or wheel motor isdefective or damaged.5. Contact Service Dealer.6. Control valve is defective ordamaged.6. Contact Service Dealer.7. Relief valve is defective ordamaged.7. Contact Service Dealer.When at rest, loader arms creepdownward more than 3” per hour(less than 3” an hour is normal forthis traction unit).*1. Valve spool leakage 1. Contact Service Dealer.When at rest, loader arms settled d 2” i kl d th1. Cylinder seals are leaking 1. Replace seals.,downward 2” quickly and thenstop.* 2. Cylinder rephase valve isleaking2. Contact Service Dealer.