Toro 04540 Operator's Manual

Also see for Greensmaster 3420 TriFlex: Manual Service manual Installation instructions Operator's manual Operator's manual

Cutting Unit Power DisconnectConnectorsBefore installing, removing, or working on the cuttingunits, disconnect the cutting units from the power supplyby separating the cutting unit power disconnect connectors(Figure 20), located at the base of the rollover bar on the leftside of the traction unit. Plug the connectors together beforeoperating the machine.Figure 201. Cutting unit power disconnect connectorCAUTIONIf you do not disconnect the power to the cuttingunits, someone could accidentally start the cuttingunit, causing serious injury to hands and feet.Always separate the cutting unit power disconnectconnectors before working on the cutting units.SpecificationsNote: Specifications and design are subject to changewithout notice.Width of cut 151 cm (59.5 inches)Wheel tread 128 cm (50.5 inches)Wheel base 119 cm (46.9 inches)Overall length (w/baskets) 249 cm (98.0 inches)Overall width 179 cm (70.6 inches)Overall height 205 cm (80.8 inches)Weight Refer to the machine serialtag (Figure 1).Attachments/AccessoriesA selection of Toro approved attachments and accessories isavailable for use with the machine to enhance and expandits capabilities. Contact your Authorized Service Dealer orDistributor or go to www.Toro.com for a list of all approvedattachments and accessories.To best protect your investment and maintain optimalperformance of your Toro equipment, count on Toro genuineparts. When it comes to reliability, Toro delivers replacementparts designed to the exact engineering specification of ourequipment. For peace of mind, insist on Toro genuine parts.22