Takagi 540P Indoor Installation Manual And Owner's Manual

Contents

Takagi 540P Indoor Installation Manual And Owner's Manual Manual pdf 56 page image

56 PageExamples ControllersBuilt-in controller Remote controller1.The display shows that PUMP TIMER 1 is in operation. Thecurrent time falls within the time range that is set for for PUMPTIMER 1.Current time: 8:00 AM (8:00)Set temperature of output water: 120 °FPUMP TIMER 1: SETPUMP TIMER 2: OFF2.The display shows that PUMP TIMER 1 is NOT in operation. Thecurrent time falls outside the time range that is set for for PUMPTIMER 1.Current time: 10:00 AM (10:00)Set temperature of output water: 120 °FPUMP TIMER 1: SETPUMP TIMER 2: OFF3.The display shows that PUMP TIMER 2 is in operation. Thecurrent time falls within the time range that is set for for PUMPTIMER 2.Current time: 8:00 PM (20:00)Set temperature of output water: 120 °FPUMP TIMER 1: OFFPUMP TIMER 2: SET4.The display shows that PUMP TIMER 2 is NOT in operation. Thecurrent time falls outside the time range that is set for for PUMPTIMER 2.Current time: 10:00 PM (22:00)Set temperature of output water: 120 °FPUMP TIMER 1: OFFPUMP TIMER 2: SET5.The display shows that PUMP TIMER 1 and PUMP TIMER 2 areset, and one of them is in operation. In this example, PUMPTIMER 1 is running because it is set to activate between 6:00 AMand 9:00 AM. (See above.)Current time: 7:00 AM (7:00)Set temperature of output water: 120 °FPUMP TIMER 1: SETPUMP TIMER 2: SET6.The display shows that PUMP TIMER 1 and PUMP TIMER 2 areset, and none of them is in operation.The current time falls outside the time ranges that are set for forPUMP TIMER 1 and PUMP TIMER 2.Current time: 10:00 AM (10:00)Set temperature of output water: 120 °FPUMP TIMER 1: SETPUMP TIMER 2: SET-Display example-Normal OperationOwner's GuideThe display on the controller indicates which PUMP TIMER is set by displaying a number below the time:1, 2, or 12. (12 indicates PUMP TIMER 1 and PUMP TIMER 2.)The arrow to the right of ON or OFF indicates the current status of the PUMP TIMER(s). If the currenttime falls within the time range set for a PUMP TIMER, the arrow will point toward ON. (The timer is ON.)If the current time falls outside the time range set for a PUMP TIMER, the arrow will point toward OFF.(The timer is OFF.)See below for examples of each scenario. In each scenario below, PUMP TIMER 1 is set to activate at6:00 AM (6:00) and deactivate at 9:00 AM (9:00). PUMP TIMER 2 is set to activate at 6:00 PM (18:00) anddeactivate at 9:00 PM (21:00).