Takagi 540P Indoor Installation Manual And Owner's Manual

Contents

Takagi 540P Indoor Installation Manual And Owner's Manual Manual pdf 52 page image

52 PageOperation ControllersBuilt-in controller Remote controller1. Turn on the 120 VAC power supply to the unit.2.Press the "TIME" button on the controller in order to setthe time. This operation is available regardless of ON/OFF of the controller.The time in the display will flash.The controllers can only have 24 hours indication of time.3.Press the "HOT" button or "COLD" button to set the time.Press and hold the "HOT" or "COLD" button to adjust thetime more quickly.NOTICE: The time is displayed in twenty-four hour clock time.For example, 11:00 is 11:00 a.m. and 23:00 is 11:00 p.m.4.Press the "TIME" button on the controller in order tosave and exit.When the remote is on, the current time and settemperature are displayed.When the remote is off, the display turns off.ORSETTING THE TIMEPUMP OPERATION TIMERSThe built-in controller and remote offer two timer settings for the pump operation:PUMP TIMER 1 and TIMER 2.The pump will only operate during the times set for TIMER 1 and TIMER 2.There are four options for pump timer operation.1. Both PUMP TIMER 1 and PUMP TIMER 2 are activated.2. Neither PUMP TIMER 1 nor PUMP TIMER 2 are activated.(The recirculation pump will never operate in this mode.)3. Only PUMP TIMER 1 is activated.4. Only PUMP TIMER 2 is activated.NOTICE: Set the time for PUMP TIMER 1 and PUMP TIMER 2 before you select apump timer option. Follow the steps in SETTING THE TIME, then complete thesteps in Setting pump timers.PUMP TIMERS 1 & 2activatedNO PUMP TIMERactivatedOnly PUMP TIMER 1activatedOnly PUMP TIMER 2activatedNormal OperationOwner's Guide