Sony XM-1600GSD Service Manual

Also see for XM-1600GSD Marketing Specifications, Connections: Operating instructions Product guide Operating instruction Operation instructions Operating instructions

Contents

1SERVICE MANUALUS ModelCanadian ModelXM-1600GSDMONAURAL POWER AMPLIFIEROther SpecificationsCircuit system OTL (output transformerless) circuitPulse power supplyInputs RCA pin jacksHigh level input connectorOutputs Speaker terminalsThrough out pin jacksSpeaker impedance 1 – 8 ΩMaximum outputs 600 W (at 4 Ω)1200 W (at 2 Ω)Rated outputs (supply voltage at 14.4 V)300 W (20 Hz – 300 Hz, 0.2% THD, at 4 Ω)600 W (20 Hz – 300 Hz, 0.6% THD, at 2 Ω)1000 W (20 Hz – 300 Hz, 1.2% THD, at 1 Ω)Frequency response 5 Hz – 300 Hz ( dB)Harmonic distortion 0.06% or less (at 100 Hz, 4 Ω)Input level adjustment range0.2 – 6.0 V (RCA pin jacks)0.4 – 12.0 V (High level input)Low-pass filter 50 – 300 Hz, –18 dB/octLow boost 0 – 10 dB (40 Hz)Power supply voltage 10.5 – 16 VCurrent drain at rated output : 40 A (4 Ω)Remote input : 2 mADimensions Approx. 358 × 50 × 264 mm (w/h/d)(14 1/8 × 2 × 10 1/2 in.) not incl.projecting parts and controlsMass Approx. 3.5 kg (7 lb. 11 oz.) not incl. accessoriesSupplied accessories Mounting screws (4)Design and specifications are subject to change withoutnotice.SPECIFICATIONSAUDIO POWER SPECIFICATIONSPOWER OUTPUT AND TOTAL HARMONIC DISTORTION300 watts minimum continuous average power into 4 ohms, 20 Hz to300 Hz with no more than 0.2% total harmonic distortion per CarAudio Ad Hoc Committee standards.+0.5–3Ver 1.0 2002. 019-873-465-012002A0400-1© 2002. 1Sony Corporatione Vehicle CompanyPublished by Sony Engineering CorporationNotes on Chip Component Replacement• Never reuse a disconnected chip component.• Notice that the minus side of a tantalum capacitor may bedamaged by heat.