Sony XM-1002-HX Marketing Specifications Specification Sheet

Also see for XM-1002HX: Operating instructions Operating instructions Service schematics Operating instructions Operating instructions

222000 MOBILE PRODUCT GUIDE – PART 2SpecificationsCircuit SystemInputsOutputsSpeaker ImpedanceRated Outputs (at 14.4 VDC)Hi-Current/Hi-Voltage:Frequency ResponseHarmonic DistortionInput Level Adjustment RangeHigh-Pass FilterLow-Pass FilterLow BoostPower RequirementsPower Supply VoltageCurrent DrainDimensions (w/h/d)WeightSupplied AccessoriesOTL (output transformerless) CircuitPulse Power SupplyRCA Pin JacksHigh Level Input ConnectorSpeaker Terminals – through out pin jacks1-8 ohms (stereo)2-8 ohms (when used as bridging amplifier)50/100 W x 2 (20-20 kHz, 0.04% THD), at 4 Ω )70/140 W x 2 (20-20 kHz, 0.1% THD), at 2 Ω )140/280 W x 1 (20-20 kHz, 0.1% THD), at 4 Ω )5-50 Hz (+0.5/-3 dB)0.005% or less (at 1 kHz, 4 Ω)0.2-4.0 V (RCA pin jack);0.4-8.0 V (High level input)50-200 Hz, -12 dB/oct50-200 Hz, -12 dB/oct0-10 dB (40Hz)12 V DC car battery (negative ground)10.5-16 VAt rated output: 26A (4 ohm hi voltage mode)Remote input: 2 mAApprox. 282 x 50 x 320 mm (111/8 x 2 x 12 5/8 in.) (not incl. projecting parts and controls)3.3 kg (7 lb. 4 oz.) (not including accessories)Mounting Screws (4); Terminal Cap (1)XM-1002HX2/1 Channel Amplifier• MOSFET Switching Power Supply• Switchable Hi Power/Hi Current Mode• Variable 50-200 Hz Hi-Pass/Lo-Pass Filter• 40 Hz EQ Boost, Hi Level In• RCA Passthrough• 100 W x 2 Ch at 0.04% THD• 280 W x 1 Ch at 0.1% THD• 140 W x 2 into 2 ohms at 0.1% THD• Discrete Dual Differential Inputs• Discrete MOSFET OutputsDesign and specifications subject to change without notice.

/ 2

Related manuals for Sony XM-1002HX