Sony VPL-SW620 Operating Instructions Manual

Also see for VPL-SW620: Operating instructions Manual Quick reference manual Quick reference manual Manual

41Using Network FeaturesNetwork1 Click on [Advanced Menu] todisplay the buttons for moresettings.2 (a)Set Advertisement.Start Advertisement Service:Set Advertisement to enabled ordisabled. Items for Advertisement areenabled only when this function isenabled. The function is disabled at thefactory default.-Community:Input the community name forAdvertisement and PJ Talk. If thecommunity name for Advertisement ischanged, the one for PJ Talk will also bechanged. Only four alphanumericcharacters can be input. The factorydefault setting is “SONY.” It isrecommended that the community namebe changed from the factory setting toavoid unnecessary access to theprojector from other computers.-Port No.:Input the transmit port ofAdvertisement. The factory defaultsetting is “53862.”-Interval:Input the transmission interval (seconds)of Advertisement. The factory defaultsetting is “30.”-Broadcast Address:Input the destination of data viaAdvertisement. If nothing is input, thedata will be broadcast in the samesubnetwork.(b)Set PJ Talk.Start PJ Talk Service:Set PJ Talk to enabled or disabled. Itemsfor PJ Talk are enabled only when thisfunction is enabled. The function isdisabled at the factory default.-Community:Input the community name ofAdvertisement and PJ Talk. If thecommunity name for PJ Talk is changed,the one for Advertisement will also bechanged. Only four alphanumericcharacters can be input. The factorydefault setting is “SONY.” It isrecommended that the community nameAdvanced Menu buttonAdvertisement buttonAdvertisement Servicesetting areaPJ Talk buttonPJ Talk Service setting area