Sony Trimaster EL BVM-E250 Operation Manual

Also see for BVM-E250: Specifications Operation manual Operation guide Manual

Contents

54 Channel Configuration MenuChapter 3 MenuColor Profile File Selects the ASC CDL data.You can select from among [Internal Memory 1], Internal Memory 2, Internal Memory 3,Internal Memory 4 and Internal Memory 5.Notes• When an ASC CDL data file is loaded using Load ASC CDL (page 57) in the ASC CDLmenu of the Auxiliary Setting menu, the file name is displayed instead of Internal Memory 1to Internal Memory 5.• When the ASC CDL data is modified, an “*” is displayed at the end of Internal Memory 1 toInternal Memory 5 or the file name (Example: Internal Memory 1*).User LUT Sets whether or not to apply the User LUT data for the Color Profile setting.[Not Applied]: The User LUT data is not applied.Applied: The User LUT data is applied.Notes• This item is disabled when there is no User LUT data to be applied.• When the User LUT data selected with the File menu is deleted using Delete LUT (page58) in the User LUT menu of the Auxiliary Setting menu, the setting for this item isautomatically switched from Applied to Not Applied.File Selects the User LUT data.When the item is selected, the LUT data loaded using Load LUT (page 58) in the User LUTmenu of the Auxiliary Setting menu are displayed. Select a file name from among thedisplayed ones. [-- (no setting) ]Color Space Displays the Color Space setting specified in the loaded LUT data file.Gamma Displays the Gamma setting specified in the loaded LUT data file.Marker Preset Sets the marker preset data.You can select from Marker1 to Marker5. [Marker1]For setting the marker, see the Marker Setting menu (page 59) of the Function Setting menu.H Shift Offset Sets the horizontal picture position when the analog signal is input.You can select when Format is set to Composite Auto, Composite NTSC, Composite PAL,Composite PAL-M, Composite SECAM, YC Auto, YC NTSC, YC PAL, YC PAL-M, YCSECAM, Component YPbPr or Component RGB.Set to –100 to +100 1). [000]1) When the setting value is out of range, the display of the setting value is changed but the horizontal positionof the picture is not changed.To hide the characters on the monitor during adjustmentSet the CHAR OFF button of the controller to on. As the characters on the display arehidden, it becomes easy to adjust the picture. To display the characters, set the CHAR OFFbutton to off.Channel Name Sets a channel name.When the item is selected, you can select a preset name, or enter a new one.PROG: Program signalEDIT: Signal from an editorCAM: Camera signalVTR: Signal from a VTRPREV: Preview monitorNew Name: Enter a new name. (Up to 20 characters can be entered.)NTSC Setup Level Sets the NTSC setup level.You can select when Format is set to Composite Auto, Composite NTSC, YC Auto or YCNTSC.You can select from 0% or 7.5%.Component Level Sets the component level of the analog component 480/60i signal.You can select when Format is set to Component YPbPr.You can select from SMPTE/EBU-N10 or Betacam.Betacam Setup Level Sets the Betacam setup level when Component Level is set to Betacam.You can select from 0% or 7.5%.Menu Function and operation ([ ]: factory setting)