Sony SNT-V304 User Manual

Also see for SNT-V304: Catalog User guide

Installation10Accessing the Video Network Station1 Run the Web browser.2 Enter the following in the [Address] box, and pressthe Enter key:http://video network station>/The “Welcome” page appears.NoteResponse may be slow depending on the conditionof the network. If screen display is delayed, stopthe URL loading, and try accessing again.z Hints• If the “Layout and Application Wizard” (page 13)has been used to make settings when the serverwas accessed in the past, a monitor screenappears instead of the “Welcome” page.• The image of the video camera connected to theVIDEO 1 input terminal is displayed on the“Welcome” page. If no video camera isconnected to this terminal, “NO VIDEO” appearsinstead.• Data is stored in the cache so that it can bequickly displayed by the Web browser. If theserver has been accessed before, data saved in thecache may be displayed, in which case pressingthe [Refresh] button in the browser will cause thelatest data to appear.