Sony MCMD-R1 Operating Instructions Card (hookup diagram) Operating Instructions Manual

Also see for MCMD-R1: Notes on usage Specifications Operating instructions

Memory Card Reader only for Hi-MD WalkmanMCMD-R1 Operating Instruction Card For more details, refer to Operating Instructions.To USB jackThe USB cable supplied with theHi-MD WalkmanCOPY buttonTo Hi-MDconnectorAccess lampCHECKbuttonCompact flash slotCompact flash5-in-1 slot• All kinds of MemoryStick• All kinds of SD cards• xD-Picture Card• Smart Media• Multimedia CardInsert a memory cardwith the front sideupward.Insert a memory cardwith the front sidedownward. 2004 Sony Corporation Printed in JapanCopying the data from a memory cardto a disc in Hi-MD modeInsert four size-AAA alkaline dry batteries inthe memory card reader.1 Insert a battery and a disc in Hi-MD mode(1GB Hi-MD disc or 60/74/80- minutestandard disc) with a sufficient free space inthe Hi-MD Walkman.2 Connect the memory card reader to theHi-MD Walkman.3 Insert a memory card in the slot.4 Press the COPY button.The memory card reader is turned on to startcopying (the access lamp flashes in green).When copying is complete, the access lampstays lit in green. The memory card reader isautomatically turend off about 10 seconds aftercompletion of copying.5 After turned off the memory card reader,press the CHECK button to check the resultaccording to access lamp indication.When copying was complete, the access lampstays lit in green (refer to the label on thebottom of the memory card reader).2-541-855-11(1)

/ 1

Related manuals for Sony MCMD-R1