Sony KD-30XS955, KD-32XS945, KD-34SX955, KD-36SX955 Operating Instructions Manual

Contents

23SETUP Setup SETUPSETUP SETUPSETUPVCR and Cable For best results, use this connection if:❑ Your cable company does not require you to use a cable box.To connect the VCR and cable1 Connect the CATV cable to the VCR’s VHF/UHF input jack.2 Use a coaxial cable to connect the VCR’s VHF/UHF output jackto the TV’s CABLE jack.3 Use an A/V cable to connect the VCR’s A/V output jacks to theTV’s A/V input jacks.4 Run Auto Program, as described in “Setting Up the Channel List”on page 43.Notes on Using This ConnectionUsingS VIDEO jacks?See page 22.To Do This ... Do This ...Watch the VCR Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in theillustration).Watch cable channels Press TV/VIDEO repeatedly to select the cable input (CABLE in theillustration).Set up the TV remote controlto operate the VCRIf you have a non-Sony VCR, you must program the remote control. See“Programming the Remote Control” on pages 49-50.Activate the TV remotecontrol to operate the VCRPress VCR/DVD FUNCTION.Control VCR functions withthe TV remote controlSee “Operating a VCR” on page 59.Label video inputs to easilyidentify equipment connectedto the TVSee the instructions for setting up Video Labels on page 90.CATV cableCoaxial cableA/V cableTVVCRCables are oftencolor-coded to connectors.Connect red to red,white to white, etc.