70Marking images on the “Memory Stick Duo”with specific information (Print mark/Image protection)When you are using a “Memory Stick Duo”with the write-protect tab, make sure thewrite-protect tab on the “Memory StickDuo” is not set to the write-protect position(p. 92).The DPOF (Digital Print Order Format)standard is used to select images forprinting on your camcorder.By marking images that you want to printout, you do not need to reselect them whenyou print them out (You cannot specify thenumber of printouts).1 Slide the POWER switchrepeatedly to turn on the PLAY/EDIT lamp.2 Touch t t t[PRINT MARK].3 Touch the image that you want toprint out later.4 Touch t [END].b Notes• To cancel Print mark, touch the image again tocancel Print mark in step 3.• Do not mark images on your camcorder if the“Memory Stick Duo” already has some imageswith the Print mark put on using other devices.This may change the information of the imageswith the Print mark put on using the otherdevice.You can select and mark images to preventaccidental erasure.1 Slide the POWER switchrepeatedly to turn on the PLAY/EDIT lamp.2 Touch t t t[PROTECT].3 Touch the image that you want toprotect.4 Touch t [END].b Notes• To cancel image protection, touch the imageagain to cancel image protection in step 3.Selecting still images forprinting (Print mark)2/ 10PRINT MARK101–0002101 OKappears.Preventing accidental erasure(Image protection)2/ 10101–0002PROTECT101 OK-appears.
