47Recording/Playback1 Set [S.TRANS/F.MARK] of the(CAMERA SET) menu to[SHOT TRANSITION].2 Press the SHOT TRANSITION/FOCUS MARKING button C tobring up the shot transition storescreen.The STORE lamp turns on.3 Press the A button to store thesettings in SHOT-A, or the Bbutton to store the settings inSHOT-B.b Notes• The settings stored in SHOT-A orSHOT-B will be erased when you setthe POWER switch to OFF.4 Press the SHOT TRANSITION/FOCUS MARKING button Cagain to bring up the shottransition check screen.The CHECK lamp turns on.Press the A button to check SHOT-A, orthe B button to check SHOT-B. Theimage will be displayed with thesettings stored in the selected SHOT.The focus, zoom, iris, gain, shutterspeed and white balance areautomatically adjusted to the storedsettings.b Notes• The settings do not shift to the storedsettings with the transition time set in[TRANS TIME] (p. 46).5 Press SHOT TRANSITION/FOCUSMARKING button C again tobring up the shot transitionexecution screen.The EXEC lamp turns on.6 Press the REC START/STOPbutton A (or B) .Press the A button for recording withSHOT-A, or the B button for recordingwith SHOT-B.The settings shift from the current onesto the stored ones.b Notes• When you change [SHOT TRANSITION](p. 46), press the SHOT TRANSITION/FOCUSMARKING button repeatedly to exit the shottransition screen.• You cannot return from the stored SHOT-A orSHOT-B settings to previous settings after youexecute the shot transition during recording.STORESHOTA BTRANSITION/FOCUS MARKINGEXECCHECKABC A buttonB buttonContinued ,
