Sony HMZ-T1 Startup Manual

Also see for HMZ-T1: Startup guide Reference guide Specifications Limited warranty Notes

1 Connect a playback equipment and a TV.3 Connect the AC power cord and plug itin.2 Connect the head mounted unit.Head mounted unitProcessor unit (Front)Enjoy Video in Four StepsBy design, the system will offer an impressive experience only after you takea moment to adjust it to fit you well. Confirm the following steps and preparefor use before enjoying content with this system.1 Connect2 Wear Adjust the head mounted unit correctly.Adjust the head mounted unit securely to your head, so that thedisplay stays directly in front of your eyes.3 Set Up Adjust the lens span correctly.The distance betweenthe centers of the pupilsWide NarrowThe distance between pupils varies from person to person. Wear thehead mounted unit correctly and adjust the lens span to the correctwidth to align images on the left and right lenses and form images.4 EnjoyWhat’s in the boxAC power cord (2for Dubai and SaudiArabian models, 1 forother models)Head mounted unit Processor unit HDMI cable (1) AccessoriesHead Mounted DisplayStartup GuideHMZ-T1Before use, also refer to “Health Precautions” and“Precautions” in the “Reference Guide.”4-297-825-12(1)1 ConnectHDMIINTVHDMIOUTBlu-ray DiscTM playerGame consolePlayback EquipmentProcessor unit (Back)4 Turn the playback equipment on.© 2011 Sony Corporation Printed in JapanIf your playback equipment has only oneHDMI OUT jack and you also want towatch content from it on a TV, connect itto the processor unit with the suppliedHigh-Speed HDMI cable, and connectthe processor unit to the TV with anotherHigh-Speed HDMI cable (recommendedcable length: up to 5 m (17 ft)).Notes Make sure to set “HDMI pass-through” to“On” in the “General Setup” menu whenconnecting a TV or other display device. Make sure that the system is in standbymode when watching content on aconnected TV or other display device.HDMI cable (supplied)To wall outlet

/ 2

Related manuals for Sony HMZ-T1