7Locations and Functions of PartsLocations and Functions of PartsAccessory Attachmentsa VF (viewfinder) connector (20-pin)Connect the cable of the viewfinder (not supplied).b Shoulder strap fitting postAttach one end of a shoulder strap (not supplied) to thisfitting post, and the other end to the fitting post on the otherside of the camera.c Accessory shoeTo attach an accessory using a 1/4-inch screw.d Viewfinder left-right positioning ringLoosen this ring to adjust the viewfinder position towardsthe left or right.e Viewfinder front-rear positioning lever and lockknobLoosen the lever and knob to adjust the viewfinder positiontowards the front or rear.For details on adjusting the viewfinder position, see“Attaching a Viewfinder” on page 16.f Lens cable clampTo secure the cable of the lens (not supplied).g Lens fixing leverTo secure the lens in the lens mount.h Lens mount capThe cover can be removed by moving the lens fixing leverupward. Keep the lens mount covered with this cap whena lens is not attached.i Lens mountTo attach a lens (not supplied).SERIESl Shoulder padb Shoulder strap fitting posta VF connectord Viewfinder left-right positioningringe Viewfinder front-rear positioninglever and lock knobf Lens cable clampg Lens fixing leverh Lens mount capi Lens mountj LENS connectork Tripod mount (bottom)c Accessory shoe