Sony Glasstron PLM-A35E Operating Instructions Manual

Also see for Glasstron PLM-A35E: Service manual Operating instructions

Contents

23 -GBAdditional InformationIf the nose piece is disconnectedReinsert the nose piece to its position.If the side pieces aredisconnectedYou can reattach the side piece.Insert the side piece to the inner side of thedisplay unit. Gently push until it clicks intoposition.However, reattaching the side pieces maycause a malfunction. Be careful not toreattach them too often.Window coatingTo avoid reflection, the windows are coated.Do not place the product in locations subjectto sudden temperature changes, or where itis excessively hot (above 60ºC/96ºF). Forexample, inside a car parked in directsunlight.The coating may develope cracks.- If the product has been exposed to rainor water.- If the product has been subject toexcessive shock by being dropped, orthe cabinet has been damaged.- If the product does not operatenormally when following the operatinginstructions. Adjust only those controlsthat are specified in the operatinginstructions. Improper adjustment ofother controls may result in damageand will often require extensive workby a qualified technician to restore theproduct to normal operation.- When the product exhibits a distinctchange in performance –– this indicatesa need for service.• Do not disassemble or modify theproduct. It may cause fire or electricshock. Have the product checked andrepaired at your Sony dealer or localauthorized Sony service facility.• Do not attempt to service the productyourself since opening the cabinet mayexpose you to dangerous voltage or otherhazards. Refer all servicing to qualifiedservice personnel.• When replacement parts are required, besure the service technician certifies inwriting that he has used replacementparts specified by the manufacturer thathave the same characteristics as theoriginal parts.Unauthorized substitutions may result infire, electric shock, or other hazards.• Upon completion of any service orrepairs to the product, ask the servicetechnician to perform routine safetychecks (as specified by the manufacturer)to determine that the product is in safeoperating condition, and to so certify.• Unplug the product from the mainsbefore cleaning. Clean the product gentlywith a dry, soft cloth, or a soft clothslightly moistened with a mild detergentsolution. Do not use any type of solvent,such as alcohol or benzine.Insert B to A.Windows