Sony DMXWL1 - BRAVIA Wireless HD Link Supplement Manual

Also see for DMXWL1 - BRAVIA Wireless HD Link: Startup guide Reference guide Specifications Notice Reference guide

DMX-WL1© 2008 Sony Corporation Printed in JapanSupplementNotice: You may experience picture noise or diminished sound quality when this system is used with other 5GHzproducts nearby.5.8GHz Cordless PhonesSome 5.8GHz Cordless Phones near the receiver unit could cause picture noise or diminish the sound quality.Solutions/Remedies:1. Press the CONNECT button to change to a different wireless channel.2. Move the cordless base station and handset 10 feet (3m) or more away from the receiver unit.5.8GHz Cordless PhoneTransmitter Unit TV with Receiver Unit10 feet (3 m)or more5.2GHz Wireless LANA Wireless LAN router or client PC (IEEE802.11a/n) could cause picture noise, diminish the sound quality, or affectWireless LAN performance.Solutions/Remedies:1. Press the CONNECT button to change to a different wireless channel.2. If your Wireless LAN router uses 5.2GHz (channels 36-48) turn off the Wireless LAN router’s wide mode. See yourrouter’s instruction manual for details.3. Change the channel of your Wireless LAN router to 2.4GHz (channels 1-11) or 5.8GHz (channels 149-165). See yourrouter’s instruction manual for details.PCTransmitter Unit TV with Receiver Unit 5.2GHz Wireless LAN RouterMultiple Wireless Link Units within the homeMultiple BRAVIA Wireless Link systems in the home could cause a picture noise or diminish the sound quality.Solutions/Remedies:1. Press the CONNECT button to change to a different wireless channel.2. Try moving the BRAVIA Wireless Link Systems further away from each other.3. Try moving the transmitter and receiver of each system closer together.Transmitter Unit Transmitter UnitTV with Receiver Unit TV with Receiver Unit4-128-554-02(1)BRAVIA Wireless Link Channel OverviewThis system has four 5.2GHz band channels.5.2GHz Wireless LAN IEEE802.11a/n may also use the same channels.5.2GHz BandCH36 CH40 CH44 CH48CONNECTThe default setting will select the wireless channel automatically. You can manually select another wireless channel bypressing the CONNECT button. When you press the CONNECT button, the wireless channel changes to the next channelas shown below. The INPUT SELECT LED 1-5 will blink according to the channel selected.CH36 CH40 CH44 CH48LED 4LED 3LED 2LED 1AutomaticLED 5POWER LINK LEVELINPUT SELECTHDMI COMPONENT1 2 3 4 5INPUT SELECT LED 1-5 CONNECT buttonFor Best Reception Performance:Make sure that the transmitter and receiver units are within 65 feet (20m) of each other.Make sure there are no walls between the transmitter and receiver units.Make sure there are no mirrors or large metal objects between the transmitter and receiver units.Make sure that the front of the transmitter points in the direction of the receiver unit.Try installing the units in a vertical or horizontal orientation to improve the reception performance and link level.Try pressing the CONNECT button to manually select a wireless channel if you experience picture noise or diminishedsound quality.Important Safety InstructionsDo not operate this product near medical equipment (pacemaker, etc.).

/ 2

Related manuals for Sony DMXWL1 - BRAVIA Wireless HD Link