Sony HAP-S1 Service Manual

Also see for HAP-S1: Reference guide Quick start guide Quick start guide Reference guide User manual

Contents

SERVICE MANUALSony CorporationPublished by Sony Techno Create CorporationSPECIFICATIONSHDD AUDIO PLAYER SYSTEM9-893-833-012013J33-1© 2013.10US ModelCanadian ModelAEP ModelUK ModelVer. 1.0 2013.10AUDIO POWER SPECIFICATIONSPOWER OUTPUT AND TOTAL HARMONIC DISTORTION (for the USA and Canadaonly):With 4 ohm loads, both channels driven, from 20 - 20,000Hz; rated 32 watts per channelminimum RMS power, with no more than 10 % total harmonic distortion from 250 milliwatts torated output.Amplifier sectionPOWER OUTPUT: 40 W + 40 W (4 ohms, 1 kHz, THD 10%)Rated Power Output: 35 W + 35 W (4 ohms, 1 kHz, THD 0.9%)Speaker impedance match: 4 ohms - 16 ohmsS/N ratio: 100 dB (20 kHz LPF, A Network)Frequency response: 10 Hz - 100 kHz (+0 dB, –3 dB) (4 ohms, LINE IN)Network sectionWired LAN1000BASE-T/100BASE-TX/10BASE-TWireless LANCompatible standards: IEEE 802.11 b/g/nFrequency band/channel: 2.4 GHz band, channels 1-11 (models for the USA and Canada),channels 1-13 (models for Europe)HDD sectionCapacity500 GB (*)* Some portions of the capacity are used for data management. Therefore, the capacity a user canuse is less than 500 GB.Supported playback formatDSD (DSF, DSDIFF), LPCM (WAV, AIFF), FLAC, ALAC, ATRAC Advanced Lossless, ATRAC, MP3,AAC, WMA (2 channels)Jack sectionInput sectionCOAXIAL INInput impedance: 75 ohmsSupported playback format: LPCM 2chSampling frequency: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHzQuantization bits: 16 bits, 24 bitsOPTICAL INSupported playback format: LPCM 2chSampling frequency: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHzQuantization bits: 16 bits, 24 bitsLINE IN 1, 2Input sensitivity: 500 mVInput impedance: 100 kilohmsOutput sectionOutput jacksLINE OUTOutput impedance: 2.2 kilohms2 Hz - 80 kHz (–3 dB)PHONES (headphone jack)Stereo jack: 8 ohms or higherEXT portType A USB, Hi-Speed USB, for connecting an external hard disk driveGeneral and othersPower requirementsModels for the USA and Canada: AC 120 V 60 HzModels for Europe: AC 230 V 50/60 HzPower consumptionModels for the USA and CanadaOn: 80 WDuring standby mode (when [Network Standby] is set to [Off]): 0.3 WDuring standby mode (when [Network Standby] is set to [On] and a wired LAN is used): 2.6 WDuring standby mode (when [Network Standby] is set to [On] and a wireless LAN is used): 2.8WModels for EuropeOn: 85 WDuring standby mode (when [Network Standby] is set to [Off]): 0.3 WDuring standby mode (when [Network Standby] is set to [On] and a wired LAN is used): 2.6 WDuring standby mode (when [Network Standby] is set to [On] and a wireless LAN is used): 2.8WDimensions (approx.) (w/h/d)265 mm × 88 mm × 304 mm (10 1/2 in. × 3 1/2 in. × 12 in.) including projecting parts andcontrolsMass (approx.)5.8 kg (12 lbs 12 5/8 oz)Supplied accessoriesDesign and specifications are subject to change without notice.Remote control (1)R03 (size-AAA) batteries (2)AC power cord (mains lead) (1)LAN cable (1)HAP-S1Note:Be sure to keep your PC used for service andchecking of this unit always updated with thelatest version of your anti-virus software.In case a virus affected unit was found duringservice, contact your Service Headquarters.