Sony DFP-R3000 Installation Manual

Also see for DFP-R3000: Quick start guide Operation guide Quick start guide

1-32 (E) DFP-R30006) At the “Coarse Lip Sync (Coarse Adjustment) ”item at the Master SDDS Settings screen, roughlyadjust the delay amount (about 2 or 3 seconds) ofthe physical position of the DFP-R3000 installedto the projector in frames.7) While listening to the Lch and Rch signals of theHEADPHONES, set the Fine Lip Sync (FineFrame Adjustment) (by 1 ms) and Coarse LipSync (Coarse Adjustment), and adjust so that theLch and Rch signals are synchronized.For details on setting using the SDDS setup software, referto the Help menu of the SDDS setup program (DFP-D3000System Setup screen).Master SDDS Settings screen(Screen for Version 2.00 Build 2.054)5-4-4. Setting UpAfter connecting the system, set the required followingparameters for SDDS system setup.Set at the LCD panel menu of the DFP-D3000 or using theSDDS setup software.For details on setting at the LCD panel menu, refer to theDFP-D3000/R3000 OPERATION MANUAL.For details on setting using the SDDS setup software, referto the setup software on-line manual.For details on surround settings and system settings, referto “DFP-D3000/R3000 Quick Start Guide”.For reference, items which need to be set in system settingsare listed below.Setting Parameters. Channel settingsGraphic equalizerSub-woofer equalizerChannel level control. Input settingsOPTICAL INPUT levelNONSYNC INPUT levelAUX INPUT levelMIC INPUT level. System settingsInput reference level settingLip sync delay setting (Refer to 5-4-3.)Master output level settingOutput reference level settingProjector switching (change over) timing setting. Preset menu settingPreset output level offsetFallback settingSurround channel delay settingSub-woofer low pass filter settingNoise reduction signal input selectionSpeaker matrix mode settingPreset name settingEqualizer ON/OFF setting by preset

/ 38

Related manuals for Sony DFP-R3000