Sony Cyber-shot RX10 II How To Use Manual

Also see for Cyber-Shot DSC-RX10M2: Instruction manual Service manual How to use Manual

Help Guidefile:///Z|/15-1h_HG/Kaihan_20151021_FV-ZV/Nouhin/Web/4574925122.w/en/print.html[10/27/2015 6:18:47 PM]to remove it from the product.To use a microSD memory card with this product, be sure to insert the microSD memorycard into a dedicated adaptor.When inserting a memory card into a memory card adaptor, be sure that the memory cardis inserted in the correct direction and then insert it as far as it will go. If the card is notinserted properly, it may result in a malfunction.[263] How to Use Precautions/This product Cleaning this productOn cleaningCleaning the lens and flashWipe the lens and flash with a soft cloth to remove fingerprints, dust, etc.Cleaning the lensDo not use a cleaning solution containing organic solvents, such as thinner, or benzine.When cleaning the lens surface, remove dust with a commercially available blower. Incase of dust that sticks to the surface, wipe it off with a soft cloth or tissue paper slightlymoistened with lens cleaning solution. Wipe in a spiral pattern from the center to theoutside. Do not spray lens cleaning solution directly onto the lens surface.Cleaning the flashClean the flash surface before use. The heat of the flash emission may cause dirt on theflash surface to start smoking or burning. Wipe the flash surface with a soft cloth to removedirt or dust, etc.Cleaning the product surfaceClean the product surface with a soft cloth slightly moistened with water, then wipe thesurface with a dry cloth. To prevent damage to the finish or casing:Do not expose the product to chemical products such as thinner, benzine, alcohol,disposable cloths, insect repellent, sunscreen or insecticide.Do not touch the product with any of the above on your hand.Do not leave the product in contact with rubber or vinyl for a long time.Cleaning the monitorIf oil from your hand or hand cream, etc., remain on the monitor, the original coating maybecome easily removable. Wipe oil or hand cream off as soon as possible.If you wipe the monitor firmly using tissue paper, etc., the coating may be scratched.