Sony Cyber-shot RX10 II How To Use Manual

Also see for Cyber-Shot DSC-RX10M2: Instruction manual Service manual How to use Manual

Help Guidefile:///Z|/15-1h_HG/Kaihan_20151021_FV-ZV/Nouhin/Web/4574925122.w/en/print.html[10/27/2015 6:18:47 PM][Watercolor], or [Illustration].The [DRO/Auto HDR] is set to [Auto HDR].[ISO] is set to [Multi Frame NR].[Smile Shutter] is being used.HintTo hold the focus and exposure during burst, change the following settings.Set [Focus Mode] to [Continuous AF].Set [ AEL w/ shutter] to [Off] or [Auto].[90] How to Use Using shooting functions Selecting a drive mode (Continuousshooting/Self-timer)Spd Priority Cont.The product continues to shoot as long as the shutter button is pressed. You cancontinuously shoot at a rate faster than that of [Cont. Shooting].1. MENU→ (Camera Settings) → [Drive Mode] → [Spd Priority Cont.].NoteBetween continuous shooting frames, an image of each frame is immediately displayed.Continuous shooting is unavailable in the following situations:The shooting mode has been set to [Sweep Panorama].The shooting mode is set to [Scene Selection] and a scene other than [Sports Action] is selected.The [Picture Effect] is set to [Soft Focus], [HDR Painting], [Rich-tone Mono.], [Miniature],[Watercolor], or [Illustration].The [DRO/Auto HDR] is set to [Auto HDR].[ISO] is set to [Multi Frame NR].[Smile Shutter] is being used.HintIn [Spd Priority Cont.] mode, the focus is determined when you press the shutter buttonhalfway down for the first image, and locked for subsequent shots. However, the cameracan continue adjusting the exposure for subsequent shots. To keep adjusting theexposure throughout the continuous shooting, set the settings as follows:Set [ AEL w/ shutter] to [Auto] or [Off].