423 Make sure that the HotSync® operation check boxes for all productupdates are selected.4 Click [Add changes to Install Tool].The product updates selected in step 3 are registered on the InstallManager window.5 Click [Now] to register these product updates with the HotSync ®operation.6 Perform the HotSync ® operation.7 Verify that no errors occurred during the HotSync ® operation.Your CLIÉ handheld is restored with the applications and data to the statebefore the last hard reset.NoteWhen you restore backup data and applications to your CLIÉ handheld, the data currentlysaved on your CLIÉ handheld will be overwritten with the backup data. Any data created oredited after you saved the backup will be lost.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Problems with image files/moviesB When you shoot a subject such as a light or a candle flame, a vertical bandmay appear. This is called “smear” and is not a malfunction.B Adjust the Flicker control setting.b For details on the Flicker control setting, refer to “CLIE Camera” in the “CLIÉApplication Manual” (HTML format).After a hard reset, all updated data and applications on my CLIÉhandheld are erased. (continued)A vertical band appears on the LCD displayA flickered image is taken